Đăng nhập
TRƯỜNG ĐẠI HỌC KINH TẾ - TÀI CHÍNH TP. HCM
QUẢN TRỊ KINH DOANH
Năng lực quản lý và khả năng
tư duy chuyên nghiệp
TÀI CHÍNH NGÂN HÀNG
Bản lĩnh nghề nghiệp
với công nghệ mới
KẾ TOÁN - KIỂM TOÁN
Tiếp cận thông tin
tạo sự khác biệt
CÔNG NGHỆ THÔNG TIN
Chìa khóa công nghệ
mang tính toàn cầu
TƯ VẤN TUYỂN SINH 2010
ĐÀO TẠO
  
    Đại học
    Cao đẳng
    Trung tâm khóa ngắn hạn
TRẮC NGHIỆM NGHỀ NGHIỆP

CHUYÊN VIÊN MẠNG CISCO - CCNA

Lịch khai giảng

THỜI LƯỢNG
160 giờ

MỤC TIÊU KHÓA HỌC
Chứng chỉ Chuyên viên Mạng Cisco (CCNA - Cisco Certified Network Associate) là chứng chỉ đầu tiên trong lĩnh vực mạng Cisco, và là chứng chỉ yêu cầu trước khi thi các chứng chỉ CCNP, CCDP, và CCSP. Chương trình CCNA bao gồm 04 học kỳ, trang bị cho học viên đầy đủ các kiến thức và kỹ năng về hệ thống mạng, chuẩn bị cho kỳ thi lấy Chứng chỉ Quốc tế Chuyên viên Mạng Cisco (CCNA) được công nhận trên hơn 150 nước trên toàn thế giới.
Chương trình CCNA đi sâu vào các kiến thức và kỹ năng căn bản và quan trọng của công nghệ mạng máy tính như Khái niệm các lớp trong mô hình Mạng OSI, LAN, WAN, định tuyến (routing), chuyển mạch (switching)… giúp học viên có đủ tự tin làm các công việc như thiết kế, lắp đặt, bảo trì, sửa chữa hệ thống mạng trong môi trường Mạng và Internet ngay sau khi tốt nghiệp.

CHƯƠNG TRÌNH DÀNH CHO NHỮNG AI

  • Kỹ thuật viên Mạng, kỹ thuật viên máy tính văn phòng, chuyên viên dự án.
  • Các chuyên viên mạng có kinh nghiệm làm việc với các sản phẩm mạng của Cisco và cần có bằng cấp để vươn lên trong nghề nghiệp.
  • Các cá nhân yêu thích lĩnh vực Network.
KIẾN THỨC CẦN TRANG BỊ
  • Học viên cần có một số kiến thức cơ bản về mạng.
  • Học viên có khả năng đọc và hiểu tài liệu tiếng Anh.
CÁC KỸ NĂNG ĐẠT ĐƯỢC
Chứng chỉ CCNA giúp 1 chuyên viên mạng khẳng định kiến thức công với khả năng của mình, và có thể thực hiện:
  • Lắp đặt bộ chuyển mạch (Switch) và bộ định tuyến (Router) và wireless trong môi trường mạng phức tạp của công ty với cấu trúc LAN & WAN của Cisco.
  • Giải quyết sự cố mạng cấp 1.
  • Nâng cấp hoạt động của mạng và tổ chức hệ thống bảo mật cho 1 công ty có tối đa 100 thiết bị đầu cuối trong mạng.
CHỨNG CHỈ
Sau khi kết thúc khóa học, học viên được Cisco Systems cấp chứng nhận hoàn tất khóa học và có đủ kiến thức, kỹ năng để tham dự kỳ thi lấy chứng chỉ Chuyên viên Mạng CCNA giá trị quốc tế của Cisco Systems Inc. thông qua Trung tâm Khảo thí Pearson VUE.

NỘI DUNG KHÓA HỌC
Semester 1:
  • Living in a Network-Centric World.
  • Communicating over the Network
  • Application layer Functionality and Protocols
  • OSI Transport Layer
  • OSI Network Layer
  • Addressing the Network – Ipv4
  • Data Link Layer
  • OSI Physical Layer
  • Ethernet
  • Planning and Cabling Networks
  • Configuring and Testing your network
Semester 3:
  • LAN Design
  • Basic Switch Concepts and Configuration
  • VLANs
  • VTP
  • STP
  • Inter-VLAN Routing
  • Basic Wireless Concepts and Configuration
Semester 2:
  • Introduction to Routing and Packet Forwarding
  • Static Routing
  • Introduction to Dynamic Routing Protocols
  • Distance Vector Routing Protocols
  • VLSM and CIDR
  • The Routing Table: A Closer Look
  • EIGRP
  • Link-State Routing Protocols
  • OSPF
Semester 4:
  • Introduction to WANs
  • Frame Relay
  • Network Security
  • ACLs
  • Teleworker Services
  • IP Addressing Services
  • Network Troubleshooting
NHỮNG KHÓA HỌC LIÊN QUAN
  • Building Scalable Cisco Internetworks (BSCI)
  • Building Cisco Multilayer Switched Networks (BCMSN)
  • Implementing Secure Converged Wide Area Networks (ISCW).
  • Optimizing Converged Cisco Networks (ONT)

NỘI DUNG KHÓA HỌC CHI TIẾT

Semester 1:
1. Living in a Network-Centric World.
  • Communicating in a Network-Centric World
  • Communication – An Essential Part of Our Lives
  • The Network as a Platform
  • The Architecture of the Internet
  • Trends in Networking
2. Communicating over the Network
  • The Platform for Communications
  • LANs, WANs and Internetworks
  • Protocols
  • Using Layered Models
  • Network Addressing
3. Application layer Functionality and Protocols
  • Applications – The Interface Between the Networks
  • Making Provisions for Applications and Services
  • Application Layer Protocols and Services Examples
4. OSI Transport Layer
  • Roles of the Transport Layer
  • The TCP Protocol – Communicating with Reliability
  • Managing TCP Sessions
  • The UDP Protocol – Communicating with Low Overhead
5. OSI Network Layer
  • Ipv4
  • Networks – Dividing Hosts into Groups
  • Routing – How our Data Packets and Handled
  • Routing Processes: How Routes are learned
6. Addressing the Network – Ipv4
  • Ipv4 Addresses
  • Addresses for Different Purposes
  • Assigning Addresses
  • Is It On My Network?
  • Calculating Addresses
  • Testing the Network Layer
7. Data Link Layer
  • Data Link Layer – Accessing the Media
  • Media Access Control Techniques
  • Media Access Control Addressing and Framing Data
  • Putting It All Together
8. OSI Physical Layer
  • The Physical Layer – Communication Signals
  • Physical Signaling and Encoding: Representing Bits
  • Physical Media – Connecting Communication
9. Ethernet
  • Overview of Ethernet
  • Ethernet – Communication through the LAN
  • The Ethernet Frame
  • Ethernte Media Access Control
  • Ethernet Physical Layer
  • Hubs and Switches
  • Address Resolution Protocol (ARP)
10. Planning and Cabling Networks
  • LANs – Making the Physical Connection
  • Device Interconnections
  • Developing an Addressing Scheme
  • Calculating the Subnets
  • Device Interconnections
11. Configuring and Testing your network
  • Configuring Cisco Devices – IOS basics
  • Applying a Basic Configuration Using Cisco IOS
  • Verifying Connectivity
  • Monitoring and Documenting of Networks
Semester 3:
1. LAN Design
  • Switched LAN Architecture
  • Matching Switches to Specific LAN Functions
2. Basic Switch Concepts and Configuration
  • Introduction to Ethernet/802.3 LANs
  • Forwarding Frames using a Switch
  • Switch Management Configuration
  • Configuring Switch Security
3. VLANs
  • Introducing VLANs
  • VLAN Trunking
  • Configure VLANs and Trunks
  • Troubleshooting VLANs and Trunks
4. VTP
  • VTP Concepts
  • VTP Operation
  • Configure VTP
5. STP
  • Redundant Layer 2 Topologies
  • Introduction to STP
  • STP Convergence
  • PVST+, RSTP and Rapid PVST+
6. Inter-VLAN Routing
  • Inter-VLAN Routing
  • Configuring Inter-VLAN Routing
  • Troubleshooting Inter-VLAN Routing
7. Basic Wireless Concepts and Configuration
  • The Wireless LAN
  • Wireless LAN Security
  • Configure Wireless LAN Access
  • Troubleshooting Simple WLAN Problems
Semester 2:
1. Introduction to Routing and Packet Forwarding
  • Inside the Router
  • CLI Configuration and Addressing
  • Building the Routing Table
  • Path Determination and Switching Functions
2. Static Routing
  • Routers and Network
  • Router Configuration Review
  • Exploring Directly Connected Networks
  • Static Routes with “Next Hop” Addresses
  • Static Routes with Exit Interfaces
  • Summary and Default Static Routes
  • Managing and Troubleshooting Static Routes
3. Introduction to Dynamic Routing Protocols
  • Introduction and Advantages
  • Classifying Dynamic Routing Protocols
  • Metrics
  • Administrative Distances
4. Distance Vector Routing Protocols
  • Introduction of Distance Vector Routing Protocols
  • Network Discovery
  • Routing Table Maintenance
  • Routing Loops
  • Distance Vector Routing Protocols today
5. RIP version 1
  • RIPv1: Distance Vector, Classful Routing Protocol
  • Basic RIPv1 Configuration
  • Verification and Troubleshooting
  • Automatic Summarization
  • Default Route and RIPv1
6. VLSM and CIDR
  • Classful and Classless Addressing
  • VLSM
  • CIDR
7. RIPv2
  • RIPv1 Limitations
  • Configuring RIPv2
  • VLSM and CIDR
  • Verifying and Troubleshooting RIPv2
8. The Routing Table: A Closer Look
  • The Routing Table Structure
  • Routing Table Lookup Process
  • Routing Behavior
9. EIGRP
  • Introduction to EIGRP
  • Basic EIGRP Configuration
  • EIGRP Metric Calculation
  • DUAL
  • More EIGRP Configurations
10. Link-State Routing Protocols
  • Link-State Routing
  • Implementing Link-State Routing Protocols
11. OSPF
  • Introduction to OSPF
  • Basic OSPF Configuration
  • The OSPF Metric
  • OSPF and Multiaccess Networks
  • More OSPF Configuration
Semester 4:
1. Introduction to WANs
  • Providing Intergrated Services to the Enterprise
  • WAN Technology Concepts
  • WAN Connection Options
2. PPP
  • Serial Point-to-Point Links
  • PPP Concepts
  • Configuring PPP
  • Configuring PPP with Authentication
3. Frame Relay
  • Basic Frame Relay Concepts
  • Configuring Frame Relay
  • Advanced Frame Relay Concepts
  • Configuring Advanced Frame Relay
4. Network Security
  • Introduction to Network Security
  • Securing Cisco Routers
  • Secure Router Network Services
  • Using Cisco SDM
  • Secure Router Management
5. ACLs
  • Using ACLs to Secure Networks
  • Configuring Standard ACLs
  • Configuring Extended ACLs
  • Configuring Complex ACLs
6. Teleworker Services
  • Business Requirements for Teleworker Services
  • Broadband Services
  • VPN Technology
7. IP Addressing Services
  • DHCP
  • Scaling Networks with NAT
  • Ipv6
8. Network Troubleshooting
  • Establishing the Network Performance Baseline
  • Troubleshooting Methodologies and Tools
  • Common WAN Implementation Issues
  • Network Troubleshooting